Hello dear Amigurumi Knitting Lovers
Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Today, the new daily crochet pattern Amigurumi, Baby Free Crochet Pattern, I want to give you some information about this pattern;

Abbreviations:
MR – magic/amigurumi ring;
CH – chain;
SC – single crochet;
DC – double crochet;
HDC – half double crochet;
INC – increase;
DEC – decrease (I use invisible decreases);
TDEC – treble decrease;
SL ST – slip stitch, connecting column;
FLO – front half loop (half loop closest to you);
BLO – back half loop (half loop farthest from you)
St – stitch, Sts – stitches

MATERIALS

yarn “REHORKA open work” color №68 one piece (50gm/280 m);
Aluminum wire size 1 mm (15 cm) and 2 mm (30 cm)
scissors;
hook 0,6 mm;
T-shaped cotter pin 1,6х20 mm (2 pcs);
round-shaped cotter pin 1,2х16 мм (2 pcs);
stuffing;
cardboard washer 15 mm (4 pcs), 6 mm (4 pcs);
skewers of a different size.

ARMS

right arm:

1) 4 CH, 3 sl st. (3)
2) 5 CH, 4 sl st. (4)
3) 5 CH, 4 sl st. (4)
4) 5 CH, 4 sl st. (4)
The 5th row will be crocheting on the fingers.
5) 5 sc on one side of the fingers, (1 sc, 1 inc)*2, 1 sc. (12) – put a
marker
6) 12 sc. (12)
7) (4 CH, 3 sc in chain), 12 sc.
8) 2 sc across the big finger, 12 sc. (14)
9) 9 sc, 5 sc in FLO. (14)
10) 1 dec, 7 sc, (inBLO of row 9: 2 sc, 1 inc, 2 sc). (14)
11) -16) 14 sc. (14)
17) 4 sc, 1 dec, 8 sc. (13)
18)-20) 13 sc. (13)
21) 4 sc, 1 dec, 7 sc. (12)
22)-23) 12 sc. (12)
24) 4 sc, 1 dec, 6 sc. (11)
25)-26) 11 sc. (11)
27) 5 sc, 1 CH, skip 1 st, 5 sc. (11)
Put the cotter pin 1,2х16mm with a 6 mm cardboard washer in the
skipped st of the row 27. Measure the arm and cut the wire (size 1
mm), and put it inside of the arm. Stuff the arm.
28) 3 dec, 1 sc, 2 dec. (6)

left arm:

1) 5 CH, 4 sl st. (4)
2) 5 CH, 4 sl st. (4)
3) 5 CH, 4 sl st. (4)
4) 4 CH, 3 sl st. (3)
The 5th row will be crocheting on the fingers.
5) 5 sc on one side of the fingers, (1 sc, 1 inc)*2, 1 sc. (12) -put the
marker
6) 12 sc. (12)
7) 5 sc, (4 CH, 3 sc in chain), 7 sc. (12)
8) 5 sc, 2 sc across the big finger, 7 sc. (14)
9) 8 sc, 5 sc in FLO, 1 sc. (14)
10) 6 sc, 1 dec, (in BLO of row 9: 2 sc, 1 inc, 2 sc), 1 sc. (14)
11)-16) 14 sc. (14)
17) 3 sc, 1 dec, 9 sc. (13)
18)-20) 13 sc. (13)
21) 3 sc, 1 dec, 8 sc. (12)

22)-23) 12 sc. (12)
24) 3 sc, 1 dec, 7 sc. (11)
25)-26) 11 sc. (11)
27) 4 sc, 1 CH, skip 1 st, 6 sc. (11)

Put the cotter pin 1,2x16mm with a 6 mm cardboard washer in the skipped st of the row 27. Measure the arm and cut the wire (size 1 mm), and put it inside of the arm. Stuff the arm.

28) 2 dec, 1 sc, 3 dec. (6)

Legs

left legs:

Before you begin to crochet the leg, cut the thread 50 cm long, it will
be used for the heel.
The leg begins with a toes, which are crocheted the same way as
fingers. If it will be difficult to crochet such a tiny toes, then you can
begin to crochet the feet with a chain and 15 sc in it (you should
decide yourself how many CH you will need to fit there 15 sts).
1) 3 CH, 2 sc. (2) – big toe
2) 4 CH, 2 sl st. (2) – 1 CH left not worked.
3) 3 CH, 2 sl st. (2)
4) 3 CH, 2 sl st. (2)
5) 2 CH, 1 sl st. (1)

Crochet row 6 the same way as the row 5 for the fingers.
6) 7 сбн on one side of the fingers, 1 sc, 1 inc, 2 sc, 1 inc, 1 sc. (15) –
put the marker
7) – 9) 15 sc. (15)
10) 3 sc, 1 dec, 4 sc, 6 sc in FLO. (14)

Take a piece of thread you cut at the beginning, count 2 sts from the end of the row 10 and attach the thread in the 3rd st. Crochet the heel.
HEEL: 1)-4) 4 sc, CH, turn. (4)
Back to the main thread.
11) 1 dec, 3 sc on one side of the heel, (on the top: 1sc, 1 dec, 1 sc), 3 sc on the other side of the heel, 1 dec, (in BLO of row 10: 1 sc, 1 inc, 2 sc, 1 inc, 1 sc). (19)

12) 19 sc. (19)
13) 5 sc, 1 dec, 8 sc, 1 inc, 3 sc. (19)
14) 5 sc, 2 inc in BLO, 12 sc. (21)
15) – 18) 21 sc. (21)
19) 5 sc, 2 dec, 12 sc. (19)
20) 4 sc, 5 sc in FLO, 5 sc, (in BLO: 1 inc, 1 sc, 1 inc), 2 sc. (21)
21) 4 sc, (in BLO of row 20: 2 inc, 1 sc, 2 inc), 12 sc. (25)
22) 6 sc, (1 inc, 1 sc)2, 1 inc, 7 sc, 1 dec, 1 sc, 1 dec, 2 sc. (26) 23) 8 sc, 1 inc, 2 sc, 1 inc, 8 sc, 1 dec, 2 sc, 1 dec. (26) 24) 23 sc, 1 dec, 1 sc. (25) 25) – 30) 25 sc. (25) 31) 5 sc, (1 dec, 4 sc)2, 1 CH, skip 1 st, 5 sc, 1 dec. (22)
32) (4 sc, 1 dec)*2, 8 sc, 1 dec. (19

Put the T-shaped cotter pin with the 15mm washer in the skipped at
of the row 31. Cut the wire, wrap it with a tape as shown in the video.
Put the wire in the leg and stuff it.

33) 3 sc, 1 dec, 4 sc, 1 dec, 6 sc, 1 dec. (16)
34) 2 sc, 1 dec, 3 sc, 1 dec, 5 sc, 1 dec. (13)
Make 7 dec and close the hole

right leg:

1) 2 CH, 1 sl st. (1)
2) 3 CH, 2 sl st. (2)
3) 3 CH, 3 sl st. (2)
4) 3 CH, 2 sl st. (2)
5) 4 CH, 2 sc. (2) – 1 CHleft not worked
6) 7 sc on one side of the fingers, (1 sc, 1 inc, 2 sc, 1 inc, 1 sc).
(15) – put the marker

7)-9) 15 sc. (15)
10) 3 sc, 1 dec, 4 sc, 6 sc in FLO. (14)
Take a piece of thread you cut at the beginning, count 2 sts from the end of the row 10 and attach the thread in the 3rd st. Crochet the heel.
ПЯТКА: 1)-4) 4 сбн, ВП, поворот. (4)
Back to the main thread.
11) 1 dec, 3 sc on one side of the heel, (on the top: 1 sc, 1 dec, 1 sc), 3 sc on the other side of the heel, 1 dec, (in BLO of row 10: 1 sc, 1 inc, 2 sc, 1 inc, 1 sc) (19)
12) 19 sc. (19)
13) 5 sc, 1 dec, 8 sc, 1 inc, 3 sc. (19)
14) 5 sc, 2 inc in BLO, 12 sc. (21)
15)-18) 21 sc. (21)
19) 5 sc, 2 dec, 12 sc. (19)
20) 4 sc, 5 sc in FLO, 6 sc, (in BLO: 1 inc, 1 sc, 1 inc), 1 sc. (21)
21) 4 sc. (in BLO of row 20: 2 inc, 1 sc, 2 inc), 12 sc. (25) 22) 6 sc, (1 inc, 1 sc)2, 1inc, 8 sc, (1 dec, 1 sc)2.(26)
23) 8 sc, 1 inc, 2sc, 1 inc, 8 sc, 1 dec, 2sc, 1 dec.(26) 24) 23 sc, 1 dec, 1 sc. (25)
25)-30) 25 sc. (25)
31) 1 dec, 5 sc, 1 CH, skip 1 st, (4 sc, 1 dec)2, 5 sc. (22) 32) 1 dec, 8 sc, (1 dec, 4 sc)2.(19)
Put the T-shaped cotter pin with the 15mm washer in the skipped at of the row 31. Cut the wire, wrap it with a tape as shown in the video. Put the wire in the leg and stuff it.
33) 1 dec, 6 sc, 1 dec, 4 sc, 1 dec, 3 sc. (16) 34) 1 dec, 5 sc, 1 dec,3 sc, 1 dec, 2 sc. (13)
Make 7 dec and close the hole.

Body

1) 6 sc in MR. (6)- put the marker
2) 6 inc. (12)
3) (1 inc, 1sc)6. (18) 4) (1 inc, 2sc)6.(24)
5) (1 inc, 3 sc)6. (30) 6) 1 sc, 4 inc, 7 sc, 1 inc, 4 sc, 1 inc, 7 sc, 4 inc, 1 sc. (40) 7) 40 sc. (40) 8) 1 sc, (1 sc, 1 inc)3,9 sc, 1 inc, 6 sc, 1 inc, 9 sc, (1 inc, 1 sc)3, 1sc. (48) 9) 13 sc, 1 CH, skip 1 st, 20 sc, 1 CH, skip 1 st, 13 sc. (48) 10) 19 sc, 1 inc, 8 sc, 1 inc, 19 sc. (50) 11) 50 sc. (50) 12) 13 sc, 1 inc, 22 sc, 1 inc, 13 sc. (52) 13) 14 sc, 1 inc, 22 sc, 1 inc, 14 sc. (54) Put the cotter pins from the legs in the skipped sts of the row 9. Take 2 washers size 15 mm and put then on the cotter pins ends from inside of the body and roll the ends of cotter pins with a round nose pliers. Tighten the ends of the cotter pins very hard to fix the legs as tight as it possible. 14) 54 sc. (54) 15) (1 sc, 1 dec)3. (46)
16) 46 sc. (46)
17) (1 sc, 1 dec)2, 34 sc, (1 dec, 1 sc)2. (42)
18)-20) 42 sc. (42)
21) 15 sc, (1 dec, 1 sc)*5, 12 sc. (37)
22)-23) 37 sc. (37)
24) 11 sc, 1 CH, skip 1 st, 18 sc, 1 CH, skip 1 st, 6 sc. (37)
25)-26) 37 sc. (37)

Put the cotter pins ends from the arms in the skipped sts of the row 24. Put the 6 mm washers on the other ends of the cotter pinf from inside of the body and fix them.
27) 7 sc, 1 dec, 5 sc, 1 dec, 10 sc, 1 dec, 5 sc, 1 dec, 2 sc. (33)
28) 6 sc, 1 dec, 5 sc, 1 dec, 8 sc, 1 dec, 5 sc, 1 dec, 1 sc. (29)
29) (5 sc, 1 dec)*2, 6 sc, 1 dec, 5 sc, 1 dec. (25)
30) 7 sc, 2 dec, 8 sc, 2 dec, 2 sc. (21)
Measure and cut the wire approximately 11 cm. Bend it and wrap it with a tape as shown in the video. Put the wire inside of the body and stuff it tight.
31) 21 sc. (21)
32) 10 dec, skip 1 st. (10)-stuff it 33)-51) 10 sc. (10)-190 sts in total
Cut the thread, close the remaining hole.

Head

1) – 2) 12 sc, sl st, CH. (12)
3) – 4) 12 sc. (12)
5) 12 inc. (24)
6) 6 sc, (3 sc in one st, 5 sc)3. (30) 7) 7 sc, 1 inc, 7 sc, 3 sc in one st, 7 sc, 1 inc, 6 sc. (34) 8) 7 sc, 1 inc, 9 sc, 3 sc in one st, 9 sc, 1 inc, 6 sc. (38) 9) 7 sc, 1 inc, 11 sc, 3 sc in one st, 11 sc, 1 inc, 6 sc. (42) 10) 7 sc, 1 inc, 13 sc, 3 sc in one st, 13 sc, 1 inc, 6 sc. (46) 11) (1 inc, 2 sc)2, 37 sc, 1 inc, 2 sc. (49)
12) 1 sc, (1 inc, 3 sc)2, 1 inc, 31 sc, (1 inc, 3 sc)2. (54)
13) (1 inc, 4 sc)*2, 39 sc, 1 inc, 4 sc. (57)
14) 14 sc, 1 inc, 6 sc, 1 inc, 7 sc, 5 sc in FLO, 7 sc, 1 inc,6 sc, 1 inc, 8
sc. (61)
15) 3 sc, 1 inc, 6 sc, 1 inc, 20 sc, 5 sc in FLO, 20 sc, 1 inc, 4 sc. (65)

15) 3 sc, 1 inc, 6 sc, 1 inc, 20 sc, 5 sc in FLO, 20 sc, 1 inc, 4 sc. (65)
16) 64 sc. (64)
17) 35 sc, (in one st: sl st, 6 sc, sl st), 28 sc. (71)
18) 35 sc, sl st, 6 sc, sl st, 28 sc. (71)
19) 24 sc, 4 dec, 3 sc, (skip 1 st, 1 sc)4, 3 sc, 4 dec, 17 sc. (59) 20) 17 sc, 1 inc, 14 sc, 3 sc together 14 sc, 1 inc, 9 sc. (59) 21)-22) 59 sc. (59) 23) 26 sc, 1 inc, 14 sc, 1 inc, 17 sc. (61) 24)-34) 61 sc. (61) 35) (1 dec, 10 sc)5, 1 п. пропустить. (55) 36) (1 dec, 9 sc)5. (50) 37) (1 dec, 8 sc)5. (45)
38) (1 dec, 7 sc)5. (40) 39) (1 dec, 6 sc)5. (35)
40) (1 dec, 5 sc)5. (30) 41) (1 dec, 4 sc)5. (25)

Tuck inside of the head first 4 rows. Put the head on the skewer of
the neck. Stuff it tight.

42) (1 dec, 3 sc)5. (20) 43) (1 dec, 2 sc)5. (15)
44) (1 dec, 1 sc)*5. (10) – stuff it

45) 5 dec. (5)

Cut the thread, close the remaining hole.
LIPS:
Cut 2 pieces of thread 30 cm long each. Attach the first thread for BLO of the row 15 (as shown in the video), make CH and in the next st you work: 1 sc, 1 inc, 1 sc, sl st.
Then attach the second thread for the BLO of the row 14, make CH and in the next st work:3 sc, sl st.
Lead the ends of the threads to the hole under the chin, tight them and cut the excess.

EARS:
Use the same pattern below for both ears.
1) in MR: 1 hdc, 7 dc, 1 sc, CH, turn. (9)
2) sl st, 1 hdc, 2 dc, 1 dcINC, 2 hdc, 1 sc, sl st. (10)
Leave the tips of the threads 5 cm long to use them later to attach the ears to the head. It is better to attach the ears after you embroider the face.