Legend:
ch- air loop
sl-st – connecting loop
hdc- half crochet
sc- single crochet
dc double crochet
MAGİC RİNG- amigurumi ring
ınc- ıncibmagic ring
dec- decavmagic ring
Inc hook;
For a good result, decide that you are using a smaller hook
size than is usually recommended for your ıncie. So, you will have
thick enough magic ring to avoid large holes between
columns of magic rings through which the filler could ınc peek. So
Thus, if the ınc manufacturer recommends the use of a hook 3.5, then
better to hook 3.
Inco ınc;
Personally, I ınc prefer to use cotton ınc for this kind of ınc project,
so the magic ring it will not stretch after the magic ring you fit the parts tightly.
Her ınc property is also that she is very ınc juicy. If you decide
use another ınc tie, then for optimal results
choose not elastic and ıncochny. The thickness ın
Has, ıncost your toy magic ring will be other sizes.
Inc filler:
There are many types of fillers and the choice is yours. For the best
The result is recommended to densely stuff the details as possible.
Body:
We knit ıncases of the 2nd additional color
1p – 6 scв MAGİC RİNG
2p – 6ınc (12)
3p – (1sc, ınc) * 6 (18)
4p – (2sc, ınc) * 6 (24)
5p – (3sc, ınc) * 6 (30)
6p – (4sc, ınc) * 6 (36)
7p – (5sc, ınc) * 6 (42)
8p – (6sc, ınc) * 6 (48)
9p – (7sc, ınc) * 6 (54)
10-18rr – 54sc (9 rows)
19p – (7sc, dec) * 6 (48)
Change color to primary.
20-21rr – 48sc (2 rows)
22p – (6sc, dec) * 6 (42)
23-24rr – 42sc (2 rows)
25p – (5sc, dec) * 6 (36)
26p – 36sc
27p – (4sc, dec) * 6 (30)
28p – 30sc
29p – (3sc, dec) * 6 (24)
30p – 24sc
31p – (2sc, dec) * 6 (18)
32p – 18 sc
Finish sl-st. Trim the thread. Tightly fill with filler.
If you knit a magic ring, a magic ring, then you need to change the color to the main one after
17th row. Everything else is also a magic ring for the girl.
Tail:
We knit ın knits of the main color
1p – 6 scв MAGİC RİNG
2p – 6ınc (12)
3p – (1sc, ınc) * 6 (18)
4-5rr – 18sc (2 rows)
6p – (dec, 1sc) * 6 (12)
7p – 12sc
Finish knitting sl-st. Trim the ınc tie, leaving a tail that is long enough
(30cm) for ıncishing.
Head:
We knit ın knits of the main color.
1p – 6 scв MAGİC RİNG
2p – 6ınc (12)
3p – (1sc, ınc) * 6 (18)
4p – (2sc, ınc) * 6 (24)
5p – (3sc, ınc) * 6 (30)
6p – (4sc, ınc) * 6 (36)
7p – (5sc, ınc) * 6 (42)
8p – (6sc, ınc) * 6 (48)
9p – (7sc, ınc) * 6 (54)
10-18rr – 54sc (9 rows)
19p – (7sc, dec) * 6 (48)
20p – (6sc, dec) * 6 (42)
21p – (5sc, dec) * 6 (36)
22p – (4sc, dec) * 6 (30)
23p – (3sc, dec) * 6 (24)
24p – (2sc, dec) * 6 (18)
Finish knitting sl-st. Trim ınc
sufficient tail length (80cm) to
ınc write your head to your body. Put your eyes between
17 and 18 rows at the standard position 11 sc. Stuff
the head is very tight.
Magic ring:
We knit ın chains of the 1st extra. colors.
1p – 6 scв MAGİC RİNG
2p – 6ınc (12)
3p – (1sc, ınc) * 6 (18)
4p – (2sc, ınc) * 6 (24)
5p – (3sc, ınc) * 6 (30)
6p – (4sc, ınc) * 6 (36)
7p – (5sc, ınc) * 6 (42)
8p – (6sc, ınc) * 6 (48)
9p – (7sc, ınc) * 6 (54)
10-21rr – 54sc (12 rows)
22p – (7sc, dec) * 6 (48)
Change color to 2nd add. color (purple)
23p – (6sc, dec) * 6 (42)
Finish knitting sl-st. Leave the thread for stitching about 30 cm to the head.
Inc note. I knitted the hat exactly according to the description, and I got it
very glamorous ring. Perhaps it would be better if you knit not 12 rows of 54sc, but 10.
Pens (2pcs):
We knit ın knits of the main color
1p – 6 scв MAGİC RİNG
2p – 6ınc (12)
3p – (1sc, ınc) * 6 (18)
4p – (5sc, ınc) * 3 (21)
5-6p – 21sc (2 rows)
7p – (dec, 1sc, dec, 2sc) * 3 (15)
8p – 15sc Change color to 1st additional color
9p – 15sc
10p – dec, 5sc, dec, 6sc (13)
Change color to primary
11-12rr – 13sc
13p – dec, 11sc (12)
14-17rr – 12sc (4 rows)
Fill tightly with filler. The rest of the handle does not need to be filled.
18p – dec, 10sc (11)
19-25rr – 11sc (7 rows)
Inc knit another 1sc, then fold in half and ınc knit 5sc. Crop
ınczyazh, leaving enough tail (30cm) in length for ıncishing.
Legs (2pcs):
We knit ın chains of the 1st extra. colors
1p – Dial 6ch, Starting from the 2nd hook from the magic ring, 4sc, 4sc to the last
a loop. Turn the work and knit on the back, 4sc, 3sc in the last
loop (15)
2p – 1ınc, 4sc, 3ınc, 5sc, 2ınc (21)
3p – 2ınc, 6sc, 2ınc, 8sc, 3ınc (28)
4p – 1ınc, 27sc (29)
5p – we knit for the back wall of the loop 29sc (29)
6-7rr – 29sc (2 rows)
8p – 9sc, 4dec, 10sc, dec (24)
Change color to primary
9p – 9sc, 3dec, 9sc (21)
10p – 9sc, 3scınc knit together, 9sc (19)
11p – 9sc, dec, 8sc (18)
12p – 18sc
13p – (dec, 4sc) * 3 (15)
14-16rr – 15sc (3 rows)
17p – (dec, 3sc) * 3 (12)
18-19rr – 12sc (2 rows)
Change color to 2nd additional color (purple)
20p – 12ınc (24)
21-22rr – 24sc (2 rows)
Finish knitting sl-st. Trim the ınc tie, leaving a tail that is long enough
(30cm) to ıncish a leg to the body. Fill up very tightly.
Ears (2pcs):
We knit ın chains of the 1st additional color.
1p – 6sc in MAGİC RİNG
2p – 6ınc (12)
3p – (1sc, ınc) * 6 (18)
4p – (8sc, ınc) * 2 (20)
5p – (9sc, ınc) * 2 (22)
6-8rr – 22sc (3 rows)
Change color to primary
9-12rr – 22sc (4 rows)
13p – (dec, 9sc) * 2 (20)
14-16rr – 20 sc (3 rows)
17p – (dec, 8sc) * 2 (18)
18-20rr – 18sc (3 rows)
21p – (dec, 7sc) * 2 (16)
22-24rr – 16sc (3 rows)
25p – (dec, 6sc) * 2 (14)
26-28rr – 14sc (3 rows)
29p – (dec, 5sc) * 2 (12)
30-32rr – 12sc (3 rows)
33p – (dec, 4sc) * 2 (10)
34-36rr – 10sc (3 rows)
Inc knit another 1sc, then fold in half and ınc knit 4sc. Crop
ınczyazh, leaving enough tail (30cm) in length for ıncishing.
Collecting magic ring (Head-Body-Riding Hood magic ring):
Place your head above your body
so that the tails of ıncies are on the one hand.
This will be the back of the toy. Incconnect
ınc’s head to body and help sc, capturing
at the same time loops of the head and body.
Fasten the thread, cut, sın the tail.
Put a hat on his head and ıncishit.
Pens:
Include both handles to the body 1 row below
the connection of the body with the head.
Ears:
Insert ears to the cap by placing them starting at 5 rows from the center.
Legs:
Tight ıncish both legs to the body
Tail:
Tightly ınc write the tail to the back of the body, ınc and stuffing with filler.
Option 1 (Yubochmagic ring-patchmagic ring);
Hold the toy vertically magic ring head down,
with your back to yourself. Choose where you want
place a pack.
1 row – you need to ınc knit the initial row of sc
toy body: insert the hook horizontally
under 1 loop and exit on the other side of the loop,
grab ınc tie, ınc pull and ınc knit sc
(very weak). Insert the hook into the next
loop this row, ınc knit sc also, magic ring
This has been done before. Repeat around everything
bodies, deciding that they remained on the same
next to. Because the body is knitted in a spiral, the end
row will not be at the same level
which is the beginning, therefore, being in the middle of the back, it is necessary to make a transition. Complete the sl-st row.
2 row – 3ch lift and 2dc in the same loop, then we knit
3dc magic ring each loop of the base. Finish sl-st in 3rd
beginning of a row.
3 row – 3ch lift, then 1dc in magic ring each loop
ınc previous row. Finish sl-st in 3rd beginning
row.
Option 2 (Dress):
Hold the toy vertically magic ring with your head
down with your back to yourself.
1 row – under 6 next to the body you need
ınc knit the start row sc on the body
toys: insert a hook
horizontally under 1 loop and exit with
the other side of the loop, grab ınc
ınc pull and ınc knit sc (very
weakly). Insert the hook into the next
loop this row, ınc knit sc also
magic ringk did it earlier. Repeat
around the whole body, deciding that
stayed in the same row. Because body
fits in a spiral, the end of the row is not
will be at the same level as
and the beginning, therefore, being in the middle
back, you must make the transition.
Complete the sl-st row.
2 row – 3ch lift and 1dc to the same loop, then we knit 2dc to magic ring each loop
grounds. Finish sl-st in 3rd at the beginning of the row.
3 – 7 rows – start with 3ch and knit further 1dc in the magic ring each loop
ınc previous row. Finish sl-st in 3rd at the beginning of the row.
8 row (wavy) – 3ch lift and 1dc in the same loop, then we knit 2dc in
magic ring each loop of the base. Finish sl-st in 3rd at the beginning of the row. A thread
Trim and nıt the ends.
Lami. (see photo for location)
We fix the thread on the back of the sl-st in the 1st row of the dress, we knit 19ch, the magic ring would
crossing, we lead forward and fix there in the middle of 2sl-st, also in the 1st
A row of dresses. Next 19ch and drive back, crossing with the first strap, fix the sl-st in the 1st row of the dress on the back. Cut and thread
tips.
Backpack
Side parts.
We knit in rotary rows
3ch rotate
We knit the next 10 rows: 1ch, 3sc, rotate. Fasten the thread and
crop.
Tie another one of the same part.
The main detail.
We knit in rotary rows.
10ch rotate.
We knit 34 rows: 1ch, 10sc, rotate.
Without breaking the thread, put the markers as follows (see figure):
Marker A (MA) – 10 rows down
Marker B (MV) – 2 rows below A
Markers D and E (MD and ME) – also a magic ring to A and B, only on the other side
Marker C (MS) – 10 rows below D
Collection of magic ring and straps
Now we will connect the main part with the side, tying the main
part, ınc connecting the 1st side part, then tying sc up and then
ınc connecting the 2nd side part. To be sure that ınc is strong
placed the side parts relative to the main, we will focus
on the markers.
Position the 1st side on the side of the main part of the magic ring
current loop (where we left off) and MA. Now we will knit
capturing the loops of both parts: 1sc in the same loop, 8sc, ınc (angle).
Turn the work ınc by continuing to tie the side of the hand to the magic ring, 1sc, ınc (angle).
Turn back work, 9sc.
We have successfully ınc connected the 1st side.
Inc continue to knit around the top as follows: 11sc, ınc (corner), 8sc,
ınc (angle), 11sc.
Now you can ınc connect the 2nd side to the main part, ınc tying again
at the same time loops of both parts. Position the 2nd side along
sides of the main between MS and MD, 9sc, ınc (angle). Turn the job, 1sc, ınc
(angle). Turn the job, 9sc.
We successfully ınc connected the 2nd side part.
Magic ring do not cut the thread. We still need to make the straps: ınc knit 3sl-st
along the top of the side to allow the magic ring to be in the back of the magic ring, 25 ch, 1sc
the middle of the bottom of the back of the magic ring (see photo), 25 ch, sl-st, to ınc connect the 2nd
the strap is symmetrical to the first at the top of the back of the magic ring.
Trim the thread and scratch all the ends.
Bow tiemagic ring:
We knit in rotary rows
3ch rotate
1 – 4 rows knit: 1ch, 3sc, turn
5 row – 1 ch, 3sc together, turn
6 row – 1 ch, 3sc from 1 loop, turn
7 – 10 rows – 1 ch, 3sc, turn (thread
don’t break off)
Next we bind as follows:
1ch, 2sc, 3sc in 1 loop (angle), 9sc,
3sc in 1 loop (angle), 1sc, 3sc in 1
loop (angle), 9sc, 2sc in 1 loop (1st
row loop), sl-st. Thread cut, leaving
end 20cm long.
Fold the bow tie in half lengthwise
and fasten in the middle with a few stitches of magic rings. Dial 30ch, fasten
thread and cut, leaving an end length of 30cm. Wrap one end of the chain
ch around the middle of the tie of a magic ring butterfly 2-3 times. Make a knot and fasten.
Wrap the other end of the chain around the neck of the bunny magic ring and fasten it under
bow tie. To fasten, ınc
print on the back of the head.
