Hello dear Amigurumi KNITTING LOVERS
Today, we share one free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. Main crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi dolls, amigurumi unigurumi lambs, amigurumi dolls, amigurumi bees, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Today’s daily new crochet pattern Amigurumi Santa Claus Free Crochet Pattern without amigurumi I want to give you some information about this pattern;
Required materials and tools:
1.Yarn:– Gazzal Baby Cotton 50g / 165m, color No. 3439 (dark red), 3449 (green), 3445 (light beige), 3432 (white) – Alize Softy 50g / 115m, color No. 55 (white)
- Hook number 2
- Filler – holofiber
- Beads for eyes with a diameter of 4mm
- Sewing needle, scissors, pins, knitting marker
- Decorative buttons with a diameter of 6mm – 2pcs
- A piece of plastic to strengthen the soles (optional)
Legend:
KA – amigurumi ring
Sc – single crochet
DC – double crochet
Ch – air loop
İnc – increase
Dec – decrease
Sl-st – connecting post
(…) – the number in brackets means number of loops in a row
(…) * X – repeat X times indicated in brackets
Attention!
The master class does not contain knitting lessons and is designed for those who have basic crochet skills. The complexity of this master class is medium.
The size of the finished toy when using these materials is about 13 cm (excluding the cap).
Legs + torso + head:
Stuff the legs and body tightly while knitting.
Please note that the legs are knitted in different ways!
First leg:
Start in red.
1st row: 6Sc in MR
2nd row: İnc in each loop (12Sc)
3rd row: (1Sc, İnc) * 6 (18Sc)
Next, prepare the insoles. Circle the sole on a sheet of paper, cut it out, and make round insoles for shoes using this plastic pattern.
(This toy uses insoles just to seal the sole, the toy does not stand on its own, since the cap outweighs. Therefore, they are not required).
4th row: behind the back wall of the loop 18Sc 5-6 rows: 18Sc (2 rows)
Insert the plastic insole inside.
7th row: 6Dec, 6Sc (12Sc)
8th row: 12Sc
Change the color to green:
9th row: (1Sc, İnc) * 6 (18Sc)
10-11 rows: 18Sc (2 rows)
Make Sl-st. Finish knitting, fasten the thread and cut.
Second leg:
Start in red.
1st row: 6Sc in MR
2nd row: İnc in each loop (12Sc)
3rd row: (1Sc, İnc) * 6 (18Sc)
4th row: behind the back wall of the loop 18Sc
5-6 rows: 18Sc (2 rows)
Insert the plastic insole inside.
7th row: 6Sc, 6Dec (12Sc)
8th row: 12Sc
Change the color to green:
9th row: (1Sc, İnc) * 6 (18Sc)
10-11 rows: 18Sc (2 rows)
Tie another 20Sc along the second leg, but do not cut the thread, but continue knit body. Place the legs next to each other, check that the decreases are straight in front.
12th row: attach the second leg to the first leg where you finished knitting (in the loop following Sl-st), knit 18Sc along the first part, then 18Sc along the second part (36Sc)
At this point, you need to install a marker (marker is in front)
13th row: (5Sc, İnc) * 6 (42Sc)
14-19 rows: 42Sc (6 rows)
20 row: (5Sc, Dec) * 6 (36Sc)
Rows 21-22: 36Sc (2 rows)
23rd row: 2Sc, Dec, (4Sc, Dec) * 5, 2Sc (30Sc)
24-25 rows: 30Sc (2 rows)
At this stage, you need to transfer the marker, for this, knit another 8Sc (or another required amount) so that it is exactly on the side, and change the color to white. Now this will be the start of the row
26th row: behind the back wall of the loop 30Sc
27th row: 30Sc
28th row: (3Sc, Dec) * 6 (24Sc)
29-30 rows: 24Sc (2 rows)
31 row: 1Sc, Dec, (2Sc, Dec) * 5, 1 Sc (18Sc)
Change the color to beige:
32 row: 18Sc
33rd row: İnc in each loop (36Sc)
34th row: (5Sc, İnc) * 6 (42Sc)
35th row: 3Sc, İnc, (6Sc, İnc) * 5, 3Sc (48Sc)
36-44 rows: 48Sc (9 rows)
45th row: 3Sc, Dec, (6Sc, Dec) * 5, 3Sc (42Sc)
46th row: (5Sc, Dec) * 6 (36Sc)
47th row: 2Sc, Dec, (4Sc, Dec) * 5, 2Sc (30Sc)
48th row: (3Sc, Dec) * 6 (24Sc)
49th row: 1Sc, Dec, (2Sc, Dec) * 5, 1Sc (18Sc)
50th row: (1Sc, Dec) * 6 (12Sc)
Fasten the thread and cut, leaving a long tip to pull off the remaining hole.
Hide the tail of the thread inside the head.
Spout:
Tie in beige, stuff lightly:
1st row: 6Sc in MR
2nd row: İnc in each loop (12Sc)
3rd row: 6 Dec (6Sc)
Fasten the thread, cut, leaving a long end for sewing.
Pens:
Tie two parts, stuff in the process of knitting. Fill only the lower part tightly, then fill in the middle, you do not need to fill the upper part.
Start in red:
1st row: 6Sc in MR
2nd row: İnc in each loop (12Sc)
3-5 rows: 12Sc (3 rows)
6th row: (4Sc, Dec) * 2 (10Sc)
Change the color to white:
7-11 rows: 10Sc (5 rows)
12th row: (3Sc, Dec) * 2 (8Sc)
13-15 rows: 8Sc (3 rows)
Fold the edges of the piece together, knit 4Sc. Fasten the thread, cut, leaving a long end for sewing.
Design and assembly:
Sew the handles symmetrically on the sides, having previously secured them with pins.
Sew on eyes between 39 and 40 (the distance between them is 2 Sc), with the same thread sew the eyebrows.
Sew a nose under the eyes.
Next, make a beard. To do this, prepare 19 pieces of 12 cm long from Alize Softy yarn. We fasten them using a hook on row 38 (see photo). I got 7 pieces on both sides of the nose and 5 pieces under the nose (for density, you can add another row below). Trim your beard.
Cap:
Type a chain of 44 Ch in white and use Sl-st to close it in a circle.
1st row: 2 Ch lifting, 44DC, Sl-st (44Dc)
2nd row: 1 Ch lifting, 44Sc, Sl-st (44Sc)
Change the color to red.
Further, each row of the cap begins with 2 Ch rise and ends with Sl-st.
3rd row: behind the front wall ne aphids 44DC
4-5 rows: 44DC (2 rows)
6th row: (20DC, Dec) * 2 (42Dc)
7th row: 10 DC, Dec, 19DC, Dec, 9DC (40Dc)
8th row: (18DC, Dec) * 2 (38Dc)
9th row: 9DC, Dec, 17DC, Dec, 8DC (36Dc)
10th row: (16DC, Dec) * 2 (34Dc)
11th row: 8DC, Dec, 15DC, Dec, 7DC (32Dc)
12th row: (14DC, Dec) * 2 (30Dc)
13th row: 7DC, Dec, 13DC, Dec, 6DC (28Dc)
14th row: (12DC, Dec) * 2 (26Dc)
15th row: 6DC, Dec, 11DC, Dec, 5DC (24Dc)
16th row: (10DC, Dec) * 2 (22Dc)
17th row: 5DC, Dec, 9DC, Dec, 4DC (20Dc)
18th row: (8DC, Dec) * 2 (18Dc)
19 row: 4DC, Dec, 7DC, Dec, 3DC (16Dc)
20 row: (6DC, Dec) * 2 (14Dc)
21st row: 3DC, Dec, 5DC, Dec, 2DC (12Dc)
22 row: (4DC, Dec) * 2 (10Dc)
23rd row: 2DC, Dec, 3DC, Dec, 1DC (8Dc)
24th row: (2DC, Dec) * 2 (6Dc)
Fasten the thread and cut, leaving a long tip to pull off the remaining hole.
Hide the tail of the thread inside.
Pompon:
Knit in white, stuff as you knit.
1st row: 6Sc in MR
2nd row: İnc in each loop (12Sc)
3rd row: (1Sc, İnc) * 6 (18Sc)
4th row: (2Sc, İnc) * 6 (24Sc)
5-8 rows: 24Sc (4 rows)
9th row: (2Sc, Dec) * 6 (18Sc)
10th row: (1Sc, Dec) * 6 (12Sc)
Fasten the thread, cut, leaving a long end for sewing. Sew the pompom to the cap. Unscrew the white bottom of the cap. Sew buttons on your tummy.
Congratulations!
Your Christmas gnome is ready!