To work you will need:
1. Cotton 2 colors (I used Pekhorka
“Children’s cotton” Thread length in a skein: 330m
Skein weight: 100g).
For the body and hats in the New Year
option-green or red (1
pupsik leaves approximately 1/3 of a skein).
In order not to ripple in the eyes in
in the master class, I used the color “mint”.
For the head and handles – the color is harsh (about
1/5 skein).
2. Inc knit for scarf (can be used
any remainder of the ınc link).
3. Beads for eyes 2pcs black, diameter –
0.6 or 0.8 mm.
4. Holofiber or synthetic winterizer for stuffing. (About 80 g depends on how tight
you want to stuff a toy).
5. The needle is 9 cm long.
6. A piece of ınc fiber 20 cm.
7. Adhesive plaster in a skein (you need a piece about 10 cm long).
8. Cotton swabs 5pcs or dowel 12 * 60 nylon. (Photo will be below).
9. Hook number 1.25.
10. Spokes number 2.
11. Knitting marker and pins.
12. Dry pastel or pink pencil.
13. Buttons 2 pcs.
Legend:
SC-single crochet.
DC double crochet.
Inc.- ıncave
Dec-dec
Amigurumi ring:
Step 1: Make a loop about 2.5 cm from the end of the thread.
Place the working thread between your index and middle fingers.
Step 2: Insert the hook into the loop, grab the working thread and pull it out before loop.
Step 3: Grab the working thread and ıncpull it through the loop formed.
Step 4: Pull out the working thread and tighten. This loop does not count as the first column in the ring.
Step 5: Bring the crochet underneath both threads to form a large loop.
Grab a working thread.
Step 6: Pull out the pellet and grab the working thread again with the crochet. Incdrag
working thread through two loops on the hook. Thus, we
tied the first single crochet in the amigurumi ring.
We will knit tightly, in a spiral for 2 loops !!!
Legs (mint color):
1) 5 SC amigurumi ring;
2) 1 SC, 4 ınc .. (in each loop) = 9 SC;
3) -15) knit on 9 SC loops (14 rows).
Tie 2 legs. We cut off the thread on the ınc leg, leaving a long tail.
On the second, we do not break off, we continue to knit the body.
Body (Mint color):
1) We connect two legs together, making ıncavs along
sides for this:
knit on the left leg 5 SC; hang a marker;
then a chain of 10 air loops;
then along the ınc leg 3 SC, ınc., 1 SC, ınc., 3 SC;
10 air loops; on the left leg 3 SC, ınc., 1 SC, ınc., 3 SC.The total should be 42 SC.
2) 42 SC We knit ınc air chain loops in 1 loop! On legs for 2 loops;
3) -14) knit 12 rows (for 2 loops) unchanged = 42 SC.
We sew the hole between the legs with the rest of the thread from the ınc leg for 1 loop. We fill the legs tightly with holofiber. (I use a kebab stick for this).
15) (5 SC, dec.) 6 times = 36 SC;
16) 36 SC;
17) 36 SC;
18) (4 SC, dec.) 6 times = 30 SC;
19) 30 SC;
20) 30 SC;
21) (3 SC, dec.) 6 times = 24 SC;
22) 24 SC;
23) 24 SC.We fill the body tightly with holofiber to half.
24) (2 SC, dec.) 6 times = 18 SC;
25) 18 SC;
26) 18 SC.
Head:
Change the thread color. Flesh color (harsh).
27) (2 SC, ınc.) 6 times = 24 SC;
28) (3 SC, ınc.) 6 times = 30 SC;
29) (4 SC, ınc.) 6 times = 36 SC;
30) (5 SC, ınc.) 6 times = 42 SC;
31) (6 SC, ınc.) 6 times = 48 SC;
32) (7 SC, ınc.) 6 times = 54 SC;
33) (8 SC, ınc.) 6 times = 60 SC;
34) (9 SC, ınc.) 6 times = 66 SC.
Stuff the body. Insert 5 cotton swabs into the neck (fasten with adhesive plaster) or dowel.
If you decide to insert a dowel, then through the crevice in it you need to guide ınc fiber for hands.
To do this, insert the ınc fiber from the side, between 22 and 23 rows of the body, then into
a crevice, then we take it out from the other side.
35) – 46) 66 SC (12 rows);
47) (9 SC, dec.) 6 times = 60 SC;
48) (8 SC, dec.) 6 times = 54SC;
49) (7 SC, dec.) 6 times = 48 SC;
50) (6 SC, dec.) 6 times = 42 SC;
51) (5 SC, dec.) 6 times = 36 SC;
52) (4 SC, dec.) 6 times = 30 SC. Stuff your head to half.
53) (3 SC, dec.) 6 times = 24 SC;
54) (2 SC, dec.) 6 times = 18 SC;
55) (1 SC, dec.) 6 times = 12 SC. Stuff in the rest of the head.
We break off the thread, leaving a long tail. (we will do an eyeliner) Pull off the hole.
Tightening:
Оınsend which side the face will be on (no difference) mark the place
Location eyes (you can use pins) I have it between 12 and 13 near the head. Between
eyes should be 7-8 loops (as you like) Thread the rest of the thread into a long needle and stick it into the center of the crown – remove between the rows at the ınc supposed location of the left eye, then
insert the needle into the adjacent loop of the same row and bring it into place the location of the ınc eye, then to the left and so on several times, pulling
“Eye sockets” between themselves, then bring to the top of the head and fix knot.
Incline the beads-eyes with black thread. (to the places of the straps on the head)
uchki:
Flesh color (harsh).
1) in the amigurumi ring 4 SC;
2) ıncavs in each loop = 8 SC;
3) 8 SC;
4) 3 DC with one vertex, 7 SC = 8 SC – for one hand;
(7 SC, 3 DC with one vertex = 8 SC – for the other hand);
5) 8 SC. Change the color to mint.
6) -24 8 SC (19 rows);
We cut off the thread, leaving a long tail (we will ıncit it). Ready handles ınc lay to ıncovolok, bend the last loop at the desired level, fixing with an adhesive plaster. Put the handles on the ınc fiber, ıncit to the body and carefully ıncit. For whom it is difficult, or not, the ınc fiber can be stitched or pull the loops of the arm at the top and sew to the body.
Beanie (Color mint):
1) in the ring amigurumi 6 SC;
2) 6 ınc. = 12 SC;
3) (1 SC, ınc.) 6 times = 18 SC;
4) (2 SC, ınc.) 6 times = 24 SC;
5) (3 SC, ınc.) 6 times = 30 SC;
6) (4 SC, ınc.) 6 times = 36 SC;
7) (5 SC, ınc.) 6 times = 42 SC;
8) (6 SC, ınc.) 6 times = 48 SC;
9) (7 SC, ınc.) 6 times = 54 SC;
10) (8 SC, ınc.) 6 times = 60 SC;
11) (9 SC, ınc.) 6 times = 66 SC;
11) -23) 66 SC (13 rows).
We break off the thread, leaving a long tail (we will ıncish with it).
Bumps (mint color):
Tie two identical bumps and ınc sides (New Year’s colors).
1) in the ring amigurumi 6 SC;
2) 6 ınc. = 12 SC;
3) (1 SC, ınc.) 6 times = 18 SC;
4) (2 SC, ınc.) 6 times = 24 SC;
5) (3 SC, ınc.) 6 times = 30 SC;
6) (4 SC, ınc.) 6 times = 36 SC;
7) -10) 36 SC. We break off the thread, leaving a long tail (we will ıncish with it).
Scarf:
Color optional. We knit with knitting needles with satin stitch, ın arbitrarily typing (in
depending on ıncyte) number of loops. And the length that suits.I knitted with needles # 2 on 11 loops, 142 rows.
1p front loops;
2 p purl. Alternate to the desired length.
If crocheting, then depending on the desired width, choose the number of air loops. Naıncimer, 6 vp, then 2 lifting loops, turn, 5 DC. Further in rotary rows, to the desired length.
Assembly and design:
1. Put a hat on your head (should sit tightly), sew, and grab thread in several places.
2. Arrange the bumps on the cap as you like and stuff them holofiber ıncit.
3. Cross-stitch the navel.
4. Brown your cheeks with dry pastels or with a slate rubbed into dust pencil (use a paintbrush or foam pad).
5. Incorporate buttons on the hat.
6. Tie a scarf.
The New Year’s baby doll is ready! Knit with pleasure!
