Hello dear Amigurumi KNITTING LOVERS
Today, we share one free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. Main crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi dolls, amigurumi unigurumi lambs, amigurumi dolls, amigurumi bees, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Today’s daily new crochet pattern Amigurumi Cute Christmas Tree without amigurumi
I want to give you some information about this pattern;
Download Cute Christmas Tree pattern recipe – DIY without downloading Cute Christmas Tree pattern crochet recipe with tan pattern make yourself without downloading the Cute Christmas Tree recipe. Download Free Pattern Cute Christmas Tree Recipe for 2020
We will need:
♥ 100% cotton thread: green, pink, yellow and brown.
♥ hook 3.5 mm.
♥ Filler.
♥ Safety eyes 12mm.
♥ Wire, adhesive plaster / electrical tape.
♥ Hot glue (optional).
♥ Sewing needles.
♥ scissors and stitch markers.
ABBREVIATIONS:
ch = chain stitch, chain |
dc = double crochet |
ıncdc = ıncavka with crochets |
b = decave |
pdc = half double crochet |
ıncпdc = ıncavka half-columns with crochet |
ınc = ıncave |
P = row |
sc = single crochet |
cn = connecting, sliding loop |
n = loop
Body:
We start knitting from the top in green
Rnd1: 6 sc in amigurumi ring
Rnd2: 6 sc
Rnd3: * 1 sc, 1 ıncave * (9)
Rnd4: 9 sc
Rnd5: * 2 sc, 1 ıncave * (12)
Rnd6: 12 sc
Rnd7: * 3 sc, 1 ıncave * (15)
Rnd8: 15 sc
Rnd9: * 4 sc, 1 ıncave * (18)
Rnd10: 18 sc
Rnd11: * 5 sc, 1 ıncave * (21)
Rnd12: 21 sc
Rnd13: * 6 sc, 1 ıncaw * (24)
Rnd14: 24 sc
Rnd15: * 7 sc, 1 ıncaw * (27)
Rnd16: 27 sc
Rnd17: * 8 sc, 1 ıncave * (30)
Rnd18: 30 sc
Rnd19: * 9 sc, 1 ıncave * (33)
Rnd20: 33 sc
Rnd21: * 10 sc, 1 ıncave * (36)
Rnd22: 36 sc
Rnd23: * 11 sc, 1 ıncaw * (39)
Rnd24: 39 sc
Rnd25: * 12 sc, 1 ıncave * (42)
Rnd26: 42 sc
Rnd27: * 13 sc, 1 ıncaw * (45)
Rnd28: 45 sc
Rnd29: * 14 sc, 1 ıncaw * (48)
Rnd30: 48 sc
Rnd31: * 15 sc, 1 ıncaw * (51)
Rnd32: 51 sc
Rnd33: * 16 sc, 1 ıncaw * (54)
Rnd34: 54 sc
Rnd35: * 17 sc, 1 ıncave * (57)
Rnd36: 57 sc
Rnd37: * 18 sc, 1 ıncaw * (60)
Rnd38: 60 sc
Rnd39: * 19 sc, 1 ıncave * (63)
Rnd40: 63 sc
Rnd41: * 20 sc, 1 ıncave * (66)
Rnd42-43: 66 sc
We begin to knit the base of the tree. You can tie a separate circle for the base. Do as
it is more convenient for you.
Rnd44: only to the back of the hinge 66 sc
Rnd45: (6 sc, dec) x8, 1 dec.
Rnd46: (5 sc, dec) x7, 6 sc, 1 dec. Take the last 3 stitches
Rnd47: * 4 sc, decave *
Stop here to join the eyes and embroider the smile and cheeks. The eyes attach between 39 and 40
rows, 8 stitches in between.
Rnd48: * 3 sc, decave *
Rnd49: * 2 sc, decave *
Fill.
Rnd50: * 2 sc, decave *
Rnd51: * 1 sc, decave *
Close the knitting, use a long thread to sew the remaining hole.
Hands (x2): Legs (x2):
Brown thread:
Rnd1: 4 sc into amigurmi ring.
Rnd2 and beyond: 4 sc
We knit a hand to a length of 7 cm, close
knitting, leave a long thread for
sewing.
Brown thread:
Rnd1: 5 sc into amigurmi ring.
Rnd2: 5 ıncws (10)
Rnd3: 10 sc
Rnd4: 5 dec (5)
Rnd5 onwards: 5 sc
We knit a leg to a length of 12-15 cm, close
knitting, leave a long thread for
sewing.
To assemble the arms: we can add filler to the legs and arms and simply sew them to the body. Or put
wire so that they bend and move.
In order to cut the hand wire you need to measure from the tip of one hand to the other considering the body
(the wire will go through the body). We bend the edge of the wire so that it does not stick out of the hand and
we wrap it with adhesive plaster / electrical tape until the end of 1 hand, then we pass the wire through the body,
bend the end and also wrap it with adhesive plaster / electrical tape. Use safety pins to make it easier
sew on your hands and they were level 1.
For the legs, we act in a similar way as with the hands, only the wire will be U-shaped and between
with your feet you need to leave a distance of 5 loops.
Garland:
For the garland, the author used light pink thread and fuchsia thread, and a 2 mm hook. We knit a chain
80-85 centimeters long and using pins, place it on the tree making 5 circles. You can her
sew on or glue on hot glue.
Star (x2):
Two equal parts are sewn together and stuffed
filler.
Yellow:
Rnd1: 5 sc into amigurmi ring.
Rnd2: 5 ıncws (10)
Rnd3: * 1 sc, ıncave * (15)
Rnd4: * 2 sc, ıncave * (20)
We begin to knit the ends of the star. They fit in rows.
Rnd5: 1 tip: 3 sc, 1vp. turn, skip 1 loop, 2 sc, 1vp
and turn. Skip 1 loop, 1 sc. Close knit and cut. Tip 2: insert the hook into the next loop 4 rows, 1 ch and turn. Skip 1 st, 3 sc, 1 ch and
turn. Skip 1 st, 2 sc, 1 ch and twist. Skip 1 loop, 1 sc. Close knit and cut. Tips 3, 4 and 5: Repeat knitting in the same way as end 2, attaching thread to row 4.
After tying the 2 parts, we sew them together without forgetting to add filler. Sew on or hot glue to the top. Your tree is ready!