Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Doll Free Crochet Pattern, I want to give you some information about this pattern;
MATERIALS AND TOOLS
- Incyazha
• Alize Cotton Gold Tweed milky (62)
• Alize Cotton Gold gray (21) and green (485)
• Alize Cotton Gold Hobby mustard (02) color
• Yarn Art Jeans in beige (87), gold (15) and brown (70) - Clover hook No. 1.75
- Filler (holofiber, etc.)
- Plastic for insoles (I use a soft cutting board)
- Incowire d=1 mm for the frame
- Adhesive plaster for insulating wire
- Eyes on a secure mount d=6 mm
- Black sewing thread for the face
- Puppet crackers
- Pompommaker
- Plastic buttons for decorating vests and bags
SYMBOLS
magic ring – amigurumi ring
ch – air loop
slst – connecting column
sc – single crochet
dc – double crochet
inc – increase (2 loops in 1)
dec – decrease (2 loops together)
zpp – rear half-loop
ppp – front half-loop zsr – rear wall of the row
psr – the front wall of the row
(…) – the number in brackets indicates the number of loops in the row
LEGS
We start with a thread of milky color. We collect a chain of 9 ch, insert the hook into the 2nd loop from the hook and knit according to the scheme:
1 row: 7 sc, 3 sc in the last loop of the chain, then on the reverse side of the chain 6 sc, inc (18)
2 row: inc, 5 sc, 5 inc, 5 sc, 2 inc (26)
3 row: 1 sc, inc, 6 sc, inc, (1 sc, inc) * 4, 6 sc, inc, 1 sc, inc (34)
4 row: 2 sc, inc, 7 sc, inc, (2 sc, inc) * 4, 7 sc, inc, 2 sc, inc (42)
Cut the thread, fasten.
At this stage, you need to prepare the insoles. We take plastic (I use a soft cutting board) and circle the connected part on it (twice), cut it out. For now, put the insoles aside and continue knitting.
The doll will have a double sole, so we knit another one of the same detail. Thread at the end of knitting
cut off. We apply two parts of the sole to each other with the front side to the wrong side so that the second sole is from below, and connect it with one row of sc (we insert the hook into the bottom sole into the zpp, in the upper sole along the sole we grab the loops completely, do not forget to insert the pre-cut from plastic insole).
This will be row 5. We cut the thread of milky color, change it to the main one.
6-9 row: 42 sc (4 rows)
10 row: 8 sc, dec, (2 sc, dec) * 5, 12 sc (36)
11 row: 36 sc
12 row: 7 sc, dec, (1 sc, dec) * 5, 12 sc (30)
13 row: 30 sc
14th row: 7 sc, 6 dec, 11 sc (24)
15 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
We cut the gray thread, change it to denim. Fill in the details.
16-39 row: 18 sc
40 row:
For the right leg (if you look at the back of the toy): 18 sc
For the left leg (if you look at the back of the toy): 15 sc, i.e. do not knit 3 sc to the end of the row
We knit 41 rows only on the right leg (if you look at the toy in the back of the head): 7 sc, i.e. do not tie 11
sc to the end of the row, cut the thread, fasten.
We knit the upper part of the shoe. We collect a chain of 16 ch, insert the hook into the 2nd loop from the hook and we knit according to the scheme:
1 row: 15 sc, turn knitting
2-24 row in st: ch 1, 15 sc, turn knit
We fold the part in half and connect the edges with one row slst (we insert the hook into the back half loops last row and loop of the original chain). We cut the thread, leaving a long end for sewing.
We tuck the part and sew it to the leg.
We embroider the laces with a milky thread as shown in the photo.
BODY
From the left leg we collect a chain of 3 ch, insert the hook into the first column of the last row of the right legs (after the “step”) and knit according to the scheme:
1 row:
on the right leg: 3 sc, inc, 6 sc, inc, 6 sc, inc
in a chain: 3 sc
on the left leg: 3 sc, inc, 6 sc, inc, 6 sc, inc
on the reverse side of the chain: 3 sc
In total, in this row you should get 48 sc. We put a marker, this will be the beginning of the row.
2nd row: 48 sc
3 row: (7 sc, inc) * 6 (54)
4-9 row: 54 sc (6 rows)
We knit an additional 27 sc. We cut the thread of denim color, change it to milk. We put
marker, this place will be the new start of the row.
10 row: 54 sc
11th row: 54 sc per st
12-13 row: 54 sc (2 rows)
14 row: (7 sc, dec) * 6 (48)
15-16 row: 48 sc (2 rows)
17 row: 3 sc, dec, (6 sc, dec) * 5, 3 sc (42)
18-19 row: 42 sc (2 rows)
20 row: (5 sc, dec) * 6 (36)
21-22 row: 36 sc (2 rows)
23 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
24-25 row: 30 sc
26 row: (3 sc, dec) * 6 (24)
27-28 row: 24 sc
29 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
We cut the thread of milky color, change it to the main one.
30 row: 18 sc per zpp
31 row: 18 sc
We cut the thread, leaving a long end for sewing.
We tie the edge of the sweater. To do this, turn the body upside down and attach the milky thread to the last half loop of the 10th row:
1 row: 1 ch, 4 sc, inc, (8 sc, inc) * 5, 4 sc (60)
Next, knit in a spiral.
2nd row: 60 sc
3 row: 60 sl-st
We cut the thread, fasten it, hide the end.
It remains to tie the collar. To do this, turn the body upside down, attach the thread
milky color to the last half-loop of the 29th row and knit 18 sl-st. Cut the thread, fasten, hide
the end.
PENS
We start with a thread of the main color. We fill loosely until the 20th row.
1 row: 6 sc in magic ring
2 row: 6 inc (12)
3 row: (3 sc, inc) * 3 (15)
4-6 row: 15 sc (3 rows)
7 row:
For the left handle (if you look at the back of the toy): bump, 14 sc
For the right handle (if you look at the back of the toy): 7 sc, bump, 7 sc
8 row: 15 sc
9 row: (3 sc, dec) * 3 (12)
10 row: 12 sc
11 row: 2 sc, dec, 4 sc, dec, 2 sc (10)
We knit an additional 4 sc for the left handle and 3 sc for the right handle. Main color thread
cut off, change to milk.
12 row: 10 sc
13th row: 10 sc per zpp
14-30 row: 10 sc (17 rows)
We knit an additional 3 sc for the left handle and 6 sc for the right handle. Folding the part
in half, connect the edges, knitting 5 sc. We cut the thread, leaving a long end for sewing.
It remains to tie the edge of the sleeve. To do this, turn the handle upside down and attach the milky thread to the first half-loop of the 12th row:
1 row: 1 ch, 2 sc, inc, 4 sc, inc, 2 sc (12)
Next, knit in a spiral.
2nd row: 12 sc
We cut the thread, fasten it, hide the end.
HEAD
We knit with a thread of the main color, fill it tightly as we knit.
1 row: 6 sc in magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5 row: (3 sc, inc) * 6 (30)
6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)
7 row: (5 sc, inc) * 6 (42)
8 row: 3 sc, inc, (6 sc, inc) * 5, 3 sc (48)
9 row: (7 sc, inc) * 6 (54)
10 row: 4 sc, inc, (8 sc, inc) * 5, 4 sc (60)
11-20 row: 60 sc (10 rows)
We place the eyes on a secure mount between 14 and 15 side by side at a distance of 6 sc between the screws.
21 row: 4 sc, dec, (8 sc, dec) * 5, 4 sc (54)
22 row: (7 sc, dec) * 6 (48)
23 row: 3 sc, dec, (6 sc, dec) * 5, 3 sc (42)
24 row: (5 sc, dec) * 6 (36)
25 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
26 row: (3 sc, dec) * 6 (24)
27 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
28 row: (1 sc, dec) * 6 (12)
I leave the hole open so that I can reinforce the neck with a wire frame.
We make out the head. Embroider eyelashes with black sewing thread (2 threads). Main Thread Yarn
Art Jeans (2 strands of 4) embroider eyelids and nose.
ASSEMBLY AND DESIGN
We sew the handles between the 26th and 27th rows of the body.
Before sewing the head to the body of the doll, I suggest strengthening the neck with a frame. For
To do this, we take a piece of wire about 20 cm long, fold it in such a way that the cut points are approximately in the middle. The length of the segment when folded should be about 10 cm. We isolate it with an adhesive plaster.
Now we place the frame in the body, and the second end in the hole in the head. The frame must be evenly distributed, i.e. half should be on the body, half on the head. Sew on head, fill the neck as you sew.
We sew trusts to the head in 3-4 rows.
CAP
Knit with mustard thread. We collect a chain of 60 ch. and close it in a ring with one slst.
1 row – 60 d
Next, we knit an elastic band 2 * 2 with embossed columns.
2 – 12 row – 2 ch, (2 dc for psr, 2 dc for zsr) * 15, sl-st in the 2nd ch. (60)
13 row – 2 ch, (2 dc for psr, 2 dc for zsr together) * 15, sl-st in the 2nd ch. (45)
14 row – 2 ch, (2 dc for psr together, 1 dc for zsr) * 15, sl-st in the 2nd ch. (30)
15 row – ch 2, (1 dc for psr + 1 dc for zsr together) * 15, sl-st in the 2nd ch. (15)
16 row – 8 dec (we knit the last decrease for the 7th sc and sl-st)
We tighten the hole, hide the thread. We form a pompom, sew. Then sew on the hat
head, hiding under it the base of the tresses.
VEST
We knit in turning rows. Each row starts with ch 1. Cast on ch 39, insert the hook into the 8th st from the hook (this will be a loop) and knit according to the pattern:
1 row: 4 sc, 2 inc, 4 sc, 2 inc, 8 sc, 2 inc, 4 sc, 2 inc, 4 sc (40)
2 row: 40 sc
3 row: 5 sc, 2 inc, 6 sc, 2 inc, 10 sc, 2 inc, 6 sc, 2 inc, 5 sc (48)
4 row: 48 sc
5 row: 6 sc, 2 inc, 8 sc, 2 inc, 12 sc, 2 inc, 8 sc, 2 inc, 6 sc (56)
6 row: 56 sc
7 row: 7 sc, 2 inc, 10 sc, 2 inc, 14 sc, 2 inc, 10 sc, 2 inc, 7 sc (64)
8 row: 64 sc
9th row: 10 sc, ch 6 (12 sc skip), 20 sc, ch 6 (12 sc skip), 10 sc
10 row: 10 sc, 6 sc in a chain, 20 sc, 6 sc in a chain, 10 sc (52)
11-25 row: 52 sc (15 rows)
We cut the thread, fasten it, hide the end. We sew on a button.
BAG
We start with a brown thread. We collect a chain of 15 ch, insert the hook into the 2nd loop from
crochet and knit in a spiral:
1 row: 14 sc, 2 sc in the last loop of the chain, then on the reverse side of the chain 14 sc (30)
2-10 row for zpp: 30 sc (9 rows)
11 row for zpp: 29 sc, sl-st
We collect a chain of 50 ch, count 14 columns, in the 15th we knit slst (into the back half-loop). A thread
cut, fasten. We knit the lid of the bag. We retreat one column from the chain (handle of the bag) and knit for the back half loops.
12 sc. On the other hand, 1 unknitted sc should also remain between the chain and the lid. We knit 4 more rows with single crochets. In the 6th row we knit 6 sc, ch 5, 6 sc. We cut the thread, fasten it, hide the end. Sew on a button.
FINISH
