Hello dear Amigurumi KNITTING LOVERS
Today, we share one free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. Main crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi dolls, amigurumi unigurumi lambs, amigurumi dolls, amigurumi bees, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Today’s daily new crochet pattern Amigurumi Fox Crochet Pattern without amigurumi
I want to give you some information about this pattern

To work we will need:

Incident (you can use any inc of your choice, with the same footage)
- White and turquoise, 5 m each. ANDRE CLASSIC, 530 m, 100 g. Ø Red MOHAIR ELEGANT NAKO, 500 m, 100 gr. Approximately 20 gr.
- White fluffy for the tip of the tail MOHAIR ELEGANT NAKO, 500 m, 100 g Incimation 3 m. Ø White for the eyes. Cotton Soft yarn, 600 m, 100 g. Incidentally 4 m. Ø Black for the spout of the ETAMIN lace, 180 m, 30 g. (hook No. 1) Ø Red for a mug Incense Cotton Soft, 600 m, 100 g. Incidentally 6 m. v Hook No. 1.25 or any other suitable for your hook v Thin filament, diameter 08-1 mm, approximately 150 cm. v Fabric-based adhesive plaster for wrapping Incofolka v Beads or half beads 4-5 mm.
Discs and nuts for fastening the head with a diameter of 18 mm. – 2 pcs.
Cotter pin
Synthetic filler (I have holofiber)
Weighting agent – plastic or glass granules
Pastel for tinting
PVA glue
white acrylic paint

Legend:

sc – single crochet

Inc – Incinc. (knit 2sc. from one loop) Dec – Decab (Inc. knit 2sc. together)

ch – air loop

sl-st – connecting post

Degree of difficulty: medium.

The height of the toy is approximately 20 cm. Sitting – 14 cm.

Hind legs (2 pcs.)

We knit the first 3 rows in turquoise, then change the color every 2 rows.

6 sc in amigurumi ring
6 Inc. (12) 3. 12sc

4-5. 12 sc (2 rows)

1 Dec, 10 sc (11)
1 Dec, 9 sc (10)
1 Dec, 8 sc (9)
1 Dec, 7 sc (8) 10-11. 8sc

Add a little filler to the sock and insert an involod frame approximately 40 cm long, folded in half.

12. 1 Dec, 6 sc (7) 13-23. 7sc

We continue to knit with red thread for the back half loops

24-26. 7 sc 27. 1 Inc, 6 sc (8)

28. 8 sc.

Cut the thread and fasten.

We return to the 24th row. Using the free front half-loops of 24 rows, we tie the stocking with connecting posts, cut the thread, fasten it and tie the ends together.

Front legs (2 pcs)

6 sc in amigurumi ring
(1 Inc, 1 sc) 3 times (9)

3-4. 9sc

1 Dec, 7 sc (8)
1 Dec, 6 sc (7)

Add a drop of filler to the palm, don’t stuff it further, insert an Incoliform frame approximately 30 cm long, folded in half and twisted.

1 Dec, 5 sc (6)

8-18. 6 sc (11 rows)

Cut the thread, fasten, and insert the tail.

Tail

We begin to knit with white thread

4 sc in amigurumi ring
(1Inc, 1 sc) 2 times (6)
(1Inc, 1 sc) 3 times (9)
(1Inc, 2 sc) 3 times (12)
12sc
(1Inc, 3 sc) 3 times (15)
15sc
(1Inc, 4 sc) 3 times (18) 9. 18 sc.

We continue knitting with red thread

(6 sc, 1sc – insert the hook 1 row below) 3 times (21)

21sc
(6 sc, 1Inc) 3 times (24)
24 sc
(7 sc, 1Inc) 3 times (27)
27sc
(8 sc, 1Inc) 3 times (30)

17-21. 30 sc (5 rows)

(8 sc, 1Dec) 3 times (27)
27sc
(7 sc, 1Dec) 3 times (24)
2 Dec, 9 sc, 2 Inc, 9 sc (24)
(6 sc, 1Dec) 3 times (21)
2 Dec, 8 sc, 2 Inc, 7 sc (21)
(5 sc, 1Dec) 3 times (18)
2 Dec, 6 sc, 2 Inc, 6 sc (18) Insert an involved frame approximately 30 cm long, bent in half, loosely stuffed.
(4sc, 1Dec) 3 times (15)
2 Dec, 7 sc, 2 Dec (11)
2 Dec, 5 sc, 1 Dec (8)

Cut the thread and fasten.

Body

6 sc in amigurumi ring
6 Inc (12)
(1 sc, 1 Inc) 6 times (18)
(2 sc, 1 inc) 6 times (24)
(2 Inc, 6 sc) 3 times (30) +2 sc – move the marker
2 Inc, 7 sc, from 1 loop – 3 sc, 10 sc, 1 loop – 3 sc, 7 sc, 2 Inc (38)
1 Inc (10 sc, 3 Inc) 2 times, 10 sc, 1 Inc (46)
2 Inc, 11 sc, 3 Inc, 14 sc, 3 Inc, 11 sc, 2 Inc (56)
2 Dec, 13 sc, 3 Inc, 16 sc, 3 Inc, 13 sc, 2 Dec (58)
1 Dec, 12 sc, 3 Dec, 18 sc, 3 Dec, 12 sc, 1 Dec (50)
50sc
23 sc, 1 Inc, 2 sc, 1 Inc, 23 sc (52) +1 Inc and align the marker as necessary
50 sc, inc knit 2 sc. simultaneously grasping the loops of the tail and body. We insert the hook from the inside of the tail.

2sc. simultaneously grasping the loops of the tail and body. Insert the hook from the inside of the tail, 48 sc, 2 sc along the remaining loops of the tail (52)

2 sc over remaining tail loops, 50 sc (52)

16-20. 52 sc (5 rows) 21. 6 sc, 1 Dec. 36 sc, 1 Dec, 6 sc (50)

22-23 50 sc (2 rows)

24. 3 sc, 1 Dec, 40 sc, 1 Dec, 3 sc (48)

25-26. 48 sc (2 rows) +1 Inc and align the marker if necessary

15 sc, 1 Dec, 14 sc, 1 Dec, 15 sc (46)
46 sc
15 sc, 1 Dec, 12 sc, 1 Dec, 15 sc (44) +1 Inc and align marker 30 as needed. 44 sc.

At this stage you can Incish your legs. We insert the involute frame of the legs between the 7th and 8th rows in the corners, between the incicles. We twist the frame of the legs with the frame of the tail, making sure that the Involoka does not tighten the knitting. Secure with adhesive tape. You can add a bag of granulate or any other weighting agent. We add filler as we knit until it reaches its final state.

2 sc, 1 Dec, 11 sc, 1 Dec, 10 sc, 1 Dec, 11 sc, 1 Dec, 2 sc (40)
40sc
9 sc, 3 sc. simultaneously grabbing the loops of the paw and body. We insert the hook from the inside of the foot ., 16 sc, 3 sc. simultaneously grabbing the loops of the second leg and the body, 9 sc (40)

9 sc, 3 sc on foot, 16 sc, 3 sc on foot, 9 sc (40)
3 sc, 1 Dec, 10 sc, 1 Dec, 6 sc, 1 Dec, 10 sc, 1 Dec, 3 sc (36)

Incrementally twist the frame of the front legs to the main frame. We make sure that the Incolobra does not tighten the knitting. Secure with adhesive tape.

10 sc, 1 Dec, 12 sc, 1 Dec, 8 sc, 1 Dec (33)
9 sc, 1 Dec, (5 sc, 1 Dec) 2 times, 9 sc (30)
6 sc, 1 Dec, 12 sc, 1 Dec, 6 sc, 1 Dec (27)
6 sc, 1 Dec, 5 sc, 1 Dec, 4 sc, 1 Dec, 6 sc (24)
(6 sc, 1 Dec) 3 times (21)
(5 sc, 1 Dec) 3 times (18)

We cut the Incovole frame just below the end of the neck and wrap it with adhesive tape. Add filler. Insert the disk and cotter pin. (The disk must be equal to the resulting circle)

(1 sc, 1 Dec) 6 times (12)
6 Dec (6)

Cut the thread and fasten.

Head

6 sc in amigurumi ring
(1Inc, 1 sc) 3 times (9)
9sc
(1Inc, 2 sc) 3 times (12)
12sc
(1Inc, 3 sc) 3 times (15)
15sc
(1Inc, 4 sc) 3 times (18)
18sc
(1Inc, 5 sc) 3 times (21)
21sc
(1Inc, 6 sc) 3 times (24)
24 sc
(1Inc, 7 sc) 3 times (27
27sc
(1Inc, 8 sc) 3 times (30)

17-18. 30 sc (2 rows)

19. (1Inc, 9 sc) 3 times (33)

We knit the place in turning rows

1 Inc, 10 sc, 1 Inc, 1 ch, turn
Purl 14 sc, 1 ch, turn
14 sc, 1 ch, turn
Purl 14 sc, 1 ch, turn
3 Dec, 2 sc, 3 Dec, 1 ch, turn
Purl 2 Dec, 1 sc, 2 Dec, 1 ch, turn
5 sc, 4 sc along the edge of the Deka, 1 sc in the last loop of the shortened 20th row, 3 Inc, 4 sc, put an additional marker, 3 sc, 1 Inc, 3 sc, put a second additional marker, 4 sc, 3 Inc, 1 sc into the previously inc-knitted loop of the shortened 20th row, 5 sc (44)

44sc
12 sc, 1 Inc, 2 sc, 1 Inc, (5 sc, 1 Inc) 3 times, 2 sc, 1 Inc, 7 sc (50)
50 sc; +2 sc to align the marker to the middle of the bottom of the head
6 sc, 1 Dec, 6 sc, 1 Dec, 5 sc, 1 Inc, 6 sc, 1 Inc, 5 sc, 1 Dec, 6 sc, 1 Dec, 6 sc (48)
48sc
(7 sc, 1 inc) 6 times (54)

33-37. 54 sc (5 rows)

(7 sc, 1 Dec) 6 times (48)
48sc
(6 sc, 1 Dec) 6 times (42)
42sc
(5 sc, 1 Dec) 6 times (36)

Add filler to the bow of the head, insert a cotter pin between 31 and 32 next to the marker level and tighten.

(4 sc, 1 Dec) 6 times (30)
30sc
(3 sc, 1 Dec) 6 times (24) 46. (2 sc, 1 Dec) 6 times (18) Add filler until perfect
(1 sc, 1 Dec) 6 times (12)
6 Dec, cut the thread, tighten the hole.

Squirrel Eyes (2 pcs)

White thread

6 sc in amigurumi ring
6 Inc (12)
(1Inc, 1 sc) 6 times (18)

4-5. 18 sc (2 rows)

(1 sc, 1 Dec) 6 times (12) Fill loosely with filler
6 Dec. Cut the thread, fasten

Eyelids (2 pcs)

Red thread

6 sc in amigurumi ring
6 Inc (12)
(1Inc, 1 sc) 6 times (18)

4-5. 18 sc (2 rows)

6. (1 sc, 1 Dec) 2 times (incomplete row). You can leave the thread for stitching, or stitch it with sewing threads to match the eyelids.

Insert the whites into the eyelids and incise, make a tightening in the middle, incise the beads or incicle the half of the beads.

Nose

Black thread, hook number 1

6 sc in amigurumi ring
(1 Inc, 1 sc) 3 times (9)
9 sc Fill the nose tightly with filler.
Declines to the end

Ears (2 pcs)

Red thread

6 sc in amigurumi ring
(1Inc, 1 sc) 3 times (9)
9sc
(1Inc, 2 sc) 3 times (12)
(1Inc, 3 sc) 3 times (15)
(1Inc, 4 sc) 3 times (18)
(1Inc, 5 sc) 3 times (21)
(1Inc, 6 sc) 3 times (24)
(1Inc, 7 sc) 3 times (27)

10-11. 27 sc (2 rows)

Fold in half and inc knit both halves 13 sc.

Drawstrings

Points 1 and 2 are approximately between 27 and 28 next to each other, with 5-6 columns between them.

Points 3 and 4 additional markers

Point 5 middle of the mouth

We insert the needle at point 3, bring it out at point 1, step back 1 stitch to the side, bring it out at point 3, tighten it, tie a knot.

Insert the needle at point 3, bring it out at point 4, step back 1 stitch to the side, insert the needle and pull it out at point 1. Step back 1 stitch to the side, bring it out at point 4, tighten. We insert the needle next to point 4, withdraw it at point 1, insert it again next to point 1 and withdraw it to point 5, retreat 1 column to the side, insert the needle and withdraw it at point 2. Retract 1 column, insert the needle and withdraw it at point 4, we tighten it, we fasten the thread, we cut the edge to point 3, we tie the threads, we tie off the ends and cut the thread.

We cover the eyes, nose and ears.

I tinted my cheeks and tummy with oil pastels.

Mug

6 sc in amigurumi ring
6 Inc (12)
(1 Inc, 1 sc) 6 times (18)
(1 Inc, 2 sc) 6 times (24)
For rear half loops 24 sc

6- 13 24 sc (8 rows) 1 sl-st, cut thread, fasten

We make a handle from beaded Incolobra. We hook the incline to 1 column at the top and bottom and twist it. We measure on the foot: the handle should not dangle on the foot. Apply PVA glue and wrap it with thread. For rigidity, I also coated the entire mug with PVA glue, giving it an even shape. After drying, paint with acrylic paints

“peas”.