Hello amigurumi lovers are here with a new work. I hope you like our pattern and enjoy knitting.
We are here with a study by Mr haas combined with carrot and easter eggs.
The pattern work is given in detail.
Abbreviations;
MAGİC RİNG- amigurumi ring
ch- air loop
sc- single crochet
sl-st – connecting column
ınc- ınc
dec-dec
Legs (2pcs):
Start with color 2 (light shade) for the sole.
1) Link a chain of 17 VP.
2) 2 sc to the 2nd loop from the hook, 14 sc, 4 sc to the last run, go to
the other side of the chain from VP, then 14 sc, 2 sc to the last loop (36)
3) 2 ınc, 14 sc, 4 ınc, 14 sc, 2 ınc (44)
4) 2 ınc, 18 sc, 4 ınc, 18 sc, 3 ınc (54)
5) 52 sc, change ınc to color 1 (dark shade). You ınc knit in this
a row smaller than sc so that the color change is in the middle of the heel.
6-9) 54 sc (54)
10) 22 sc, dec, 2 sc, dec, 2 sc, dec, 22 sc (51)
11) 21 sc, dec, sc, dec, 1 sc, dec, 22 sc (48)
12) 23 sc, 1sl-st, then we introduce a hook into the third loop of the base ıncava from
hook, and then into the third base loop to the left of the magic ring hook and ınc knit sl-st,
so ınc knit another 14 sl-st, connecting the two halves of knitting between
yourself and forming a foot.
Next 7 sc. Now you are back to the middle of the heel.
Fill the leg with filler.
13) 7 sc, 1 sc on the upper seam of the foot, 7 sc (15)
14-18) 15 sc (15)
19) (4 sc, ınc) x3 (18)
20-24) 18 sc (18)
25) (5 sc, ınc) x3 (21)
26-30) 21 sc (21)
31) (6 sc, ınc) x3 (24) P32-36) 24 sc (24)
37) (7 sc, ınc) x3 (27)
38-42) 27 sc (27)
43) ınc, 26 sc (28)
Fill the leg with filler.
For knitting the next leg in this place
you should be ıncamo above the middle
heels. In the ıncitive case, some
sc, i.e. offset loops to get to this place.
44) 13 sc, ınc, 14 sc (29)
45) 14 sc, ınc, 14 sc (30)
46) 14 sc, ınc, 15 sc (31)
47) 15 sc, ınc, 15 sc (32)
48) 15 sc, 2 ınc, 15 sc (34)
49) 16 sc, ınc, sc, ınc, 15 sc (36)
50-56) 36 sc (36)
57) (4 sc, dec) x6 (30)
58) 30 sc (30)
Fill the leg will fill
Fill the leg with filler.
59) (3 sc, dec) x6 (24)
60) 24 sc (24)
61) (2 sc, dec) x6 (18)
Fill the foot further.
62) (sc, dec) x6 (12)
Sew in the hole.
Hands (2pcs);
Start with color 2 (light shade).
1) Link a chain of 5 VP.
2) 2 sc to the second loop from the hook, 2 sc, 4 sc to the last run, go
to the other side of the chain of vp, 2 sc, 2 sc to the last ch (12)
3) ınc, 4 sc, 2 ınc, 4 sc, ınc (16)
4) ınc, 7 sc, ınc, 7 sc (18)
5) 18 sc (18)
6) ınc, 9 sc, ınc, 7 sc + 2 sc to change ınc to color 1 (dark
shade). (20)
7-10) 20 sc (20) Fill the arm with filler.
11) 9 sc, dec, 7 sc, dec + 1 sc in order to go to side (18)
12) 9 sl-st, 9 sc (18)
13) 9 sl-st, 9 sc (18)
14-24) 18 sc (18)
25) 9 sc, 9 sl-st (18)
26) 9 sc, 9 sl-st (18)
27-29) 18 sc (18) + 4 sc to the middle in the last row to go to the bottom
parts of the hand. Fill the ınc shoulder with filler.
30) ınc, 8 sc, ınc, 8 sc (20)
31) 20 sc (20)
32) ınc, 9 sc, ınc, 9 sc (22)
33) 22 sc (22) + 2 sc to exit again in the center.
34) ınc, 10 sc, ınc, 10 sc (24)
35) 24 sc (24)
36) ınc, 11 sc, ınc, 11 sc (26)
37-42) 26 sc (26)
43) (11 sc, dec) x2 (24)
Fill the top with filler.
44) (2 sc, dec) x6 (18)
45) (sc, dec) x6 (12)
Fill your hand with filler.
46) (dec) x3 (9) Sew the hole.
Body;
The body is fully matched in color 1 (dark shade). You will also need
part of the safety joint.
1) 6 scв MAGİC RİNG (6)
2) 6 ınc (12)
3) (sc, ınc) x6 (18)
4) (2 sc, ınc) x6 (24)
5) (3 sc, ınc) x6 (30)
6) (4 sc, ınc) x6 (36)
7) (5 sc, ınc) x6 (42)
8) (6 sc, ınc) x6 (48)
9) (7 sc, ınc) x6 (54)
10) (8 sc, ınc) x6 (60)
11-18) 60 sc (60)
19) (18 sc, dec) x3 (57)
20) 57 sc (57)
21) (17 sc, dec) x3 (54)
22) 54 sc (54)
23) (16 sc, dec) x3 (51)
24) 51 sc (51)
25) (15 sc, dec) x3 (48)
26) 48 sc (48)
27) (14 sc, dec) x3 (45)
28) 45 sc (45)
29) (13 sc, dec) x3 (42)
30) 42 sc (42)
31) (12 sc, dec) x3 (39)
32) 39 sc (39)
33) (11 sc, dec) x3 (36)
34-35) 36 sc (36)
36) (10 sc, dec) x3 (33)
37-38) 33 sc (33)
39) (9 sc, dec) x3 (30)
40-45) 30 sc (30)
46) (8 sc, dec) x3 (27)
47) 27 sc (27)
48) (7 sc, dec) x3 (24)
49) 24 sc (24)
Fill the body with filler.
50) (2 sc, dec) x6 (18)
51) (sc, dec) x6 (12)
Fill the body with filler.
Insert a part of the safety pin joint into the hole. Sew up
the hole so that the pin remains protruding.
Head;
Start with color 2 (light shade) for the face. In the end you will need
the rest of the safe hinge.
1) 6 scв MAGİC RİNG (6)
2) 6 ınc (12)
3) (sc, ınc) x6 (18)
4) 18 sc (18)
5) (5 sc, ınc) x3 (21)
6) 21 sc (21)
7) (6 sc, ınc) x3 (24)
8) (7 sc, ınc) х3 (27). Replace the color in the last column with color 1 (dark shade).
9) (8 sc, ınc) x3 (30)
10) (9 sc, ınc) x3 (33)
11) (10 sc, ınc) x3 (36)
12) (11 sc, ınc) x3 (39)
13) (12 sc, ınc) x3 (42)
14) (13 sc, ınc) x3 (45)
15) (14 sc, ınc) x3 (48)
16-24) 48 sc (48)
25) 1 VP, 1 loop ınc base, 47 sc (48)
26) (6 sc, dec) x6 (42)
27) (5 sc, dec) x6 (36)
28) (4 sc, dec) x6 (30)
29) (3 sc, dec) x6 (24)
Place safe eyes between rows 15-16 with ınc between them
at 15 sc. Fill your head a little with filler.
30) 24 sc (24)
31) (2 sc, dec) x6 (18)
Fix the head on the body: insert the housing pin through the hole in 25
next to. Put the plastic washer on the pin inside the head and tightly
screw the hinge.
Fill your head with filler to the end.
32) (sc, dec) x6 (12)
Sew in the hole.
Ears (2pcs);
Ears fully fit in color 1 (dark shade).
1) 6 scв MAGİC RİNG (6)
2) (sc, ınc) x3 (9)
3-5) 9 sc (9)
6) (2 sc, ınc) x3 (12)
7-9) 12 sc (12)
10) (3 sc, ınc) x3 (15)
11-13) 15 sc (15)
14) (4 sc, ınc) x3 (18)
15-16) 18 sc (18)
17) (5 sc, ınc) x3 (21)
18) 21 sc (21)
19) (6 sc, ınc) x3 (24)
20) 24 sc (24)
21) (7 sc, ınc) x3 (27)
22) (8 sc, ınc) x3 (30)
23) (9 sc, ınc) x3 (33)
24) (10 sc, ınc) x3 (36)
25-29) 36 sc (36)
30) (10 sc, dec) x3 (33)
31) 33 sc (33)
32) (9 sc, dec) x3 (30)
33) (8 sc, dec) x3 (27)
34) (7 sc, dec) x3 (24)
35) (6 sc, dec) x3 (21)
Leave a long thread for writing.
Embroider the inside of the ear with color 2 (light shade) according to your
discretion. Inci ıncisming ears to the head to roll the ears at the bottom
by boat.
Tail;
The tail is fully matched in color 2 (light shade).
1) 6 scв MAGİC RİNG (6)
2) (ınc) x6 (12)
3) (sc, ınc) x6 (18)
4) (2 sc, ınc) x6 (24)
5-7) 24 sc (24)
8) (2 sc, dec) x6 (18)
9) 18 sc, ınc only knit on the back wall (18). Inc and you get
sewing edge to be able to ıncish tail to body.
Assembly;
- Incise the ears on both sides of the head as you like. Hands and feet with buttons to the body.
- ınc divide where the legs should ınfold to the body and fix it
ınc position and using piece of magic ringınc wire. Take a double thread of color 1
(dark shade) and a piece of ınc wire. Incolite ıncwoven legs through the body
through and through, fixing the position of the legs. - Insert the needle from the inside of the leg, remove it from the outside. Take
button and ıncore a needle through it. Insert the needle in the same place
back through the leg and through the body at the attachment point. Insert the needle in place
fastening from the inside out through the other leg. Take the button and ınc
through her a needle. Insert the needle now back into the same mounting location on
leg and through the body. Take out the needle in place of the very first ıncocol.
Now you have the beginning and end of the thread between the first leg and the body.
Gently ınc pull both sides of the thread so that your legs tightly ın
body and were still able to move. Tie the ends of the thread in triple
knot and nıncry it into the body. Decide the ınc wire. - Repeat this ınc hand treatment.
- Embroider a black thread nose on the face of a hare. Embroider with black thread
toes. - Fill the tail and ıncish it to the body for the stitches of the sewing edge. Tie
desired scarf as desired.
Carrot;
Morkovmagic ring fully knits in orange. Fill it with filler as you knit.
1) 6 scв MAGİC RİNG (6)
2) (sc, ınc) x3 (9)
3-6) 9 sc (9)
7) (2 sc, ınc) x3 (12)
8-10) 12 sc (12)
11) (3 sc, ınc) x3 (15)
12-14) 15 sc (15)
15) (4 sc, ınc) x3 (18)
16-18) 18 sc (18)
19) (5 sc, ınc) x3 (21)
20-22) 21 sc (21)
23) (6 sc, ınc) x3 (24)
24-25) 24 sc (24)
26) (7 sc, ınc) x3 (27)
27-28) 27 sc (27)
29) (8 sc, ınc) x3 (30)
30) 30 sc (30)
31) (9 sc, ınc) x3 (33)
32) (10 sc, ınc) x3 (36)
33-37) 36 sc (36)
38) (4 sc, dec) x6 (30)
39) (3 sc, dec) x6 (24)
40) (2 sc, dec) x6 (18)
41) (sc, dec) x6 (12)
42) (dec) x3 (9) Sew in the hole.
Inc carrot leaves are a chain of aerial loops,
tied with single crochet columns and arches of air loops, about 10-12 cm long.
Tie a chain of air loops of the desired length, lock it in a circle.
Start tying with single crochet, periodically making arches from
air loops. To do this, dial 6 VP, ınc
grounds and in the third ınc knit sc. So repeat periodically, varying
between arches the number of ınc
Tie in a circle.
Fold the circle in half and write to the open top of the carrot. For
so that the leaves are in an upright position, wrap them several
times at the base of the green ıncies. Cut the thread and cnintail the ponytails into the carrot.
Eggs;
Eggs can be knitted from ın residues of various colors. Fill the eggs
filler as you knit.
1) 6 scв MAGİC RİNG (6)
2) (ınc) x6 (12)
3) (sc, ınc) x6 (18)
4) (2 sc, ınc) x6 (24)
5) (3 sc, ınc) x6 (30)
6) (4 sc, ınc) x6 (36)
7-11) 36 sc (36)
12) (10 sc, dec) x3 (33)
13-14) 33 sc (33)
15) (9 sc, dec) x3 (30)
16) 30 sc (30)
17) (8 sc, dec) x3 (27)
18) 27 sc (27)
19) (7 sc, dec) x3 (24)
20) 24 sc (24)
21) (2 sc, dec) x6 (18)
22) (sc, dec) x6 (12)
23) (sc, dec) x3 (9) Sew in the hole.
