Hello dear Amigurumi KNITTING LOVERS
Today, we share one free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. Main crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi dolls, amigurumi unigurumi lambs, amigurumi dolls, amigurumi bees, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Today’s daily new crochet pattern Amigurumi Pokemon Bulbasaur Crochet Pattern without amigurumi
I want to give you some information about this pattern;

YARN COLORS

Red Heart Super Saver:
Minty
Spring Green
Real Teal
Hunter Green
Black
White
Red

FELT COLORS

White
Red
Black
Optional: Teal

OTHER MATERIALS

Fiber-fil stuffing
18 gauge stem wire (19
inches)
Black Embroidery Floss
Hot glue

TOOLS NEEDED

G hook (4.0mm)
Scissors
Yarn Needle
Felting Needle
*Note: | use a felting needle to apply felt
to my amigurumi. This is an optional
technique. If you do not have a felting
needle you can use glue instead.

ABOUT THIS PATTERN

* While making this amigurumi you will work in

continuous rounds, unless told otherwise. Use

a stitch maker to mark end of your rounds.

* The finished amigurumi should

measure approximately 6.5 inches tall ina

sitting position. Size may vary, depending on

yarn type and personal yarn tension.

* Instructions that need to be repeated will be

marked with brackets followed by the number

of times it needs to be repeated.

Example:

Round 4) [2 sc, inc] rep 6 times (24)

IMPORTANT INFORMATION

e You may not claim this pattern as your own.
You may not alter, copy, sell, or redistribute
this pattern in whole or in part.
¢ This pattern is intended for personal use only.
e If you use publish photos of items made from
this pattern | ask that you please give me
credit as the original designer of the pattern.
It’s always a good idea to give credit where
credit is due.

Abbreviations

sc = single crochet
inc = increase (2 sc in the next sc)
hdc= half double crochet
dc = double crochet
dec = invisible decrease
sl st = slip stitch
rep = repeat

Head

Use Minty
Round 1) 6 SC in Magic Ring (6) Round 2) INC around (12)
Round 3) [1 sc, inc] rep 6 times (18)
Round 4) [2 sc, inc] rep 6 times (24) Round 5) [3 sc, inc] rep 6 times (30) Round 6) [4 sc, inc] rep 6 times (36) Round 7) [5 sc, inc] repeat around (42) Round 8) [6 sc, inc] rep 6 times (48) Round 9) [7 sc, inc] rep 6 times (54) Round 10) – Round 14) SC around (54) Round 15) 3 inc, in Front Loops (8 sc, 6 inc, 8 sc), 3 inc, 26 sc (66)
Round 16) [10 sc, inc] rep 6 times (72) Round 17) sc around (72)
Round 18) 6 sc, [3 sc, dec] rep 6 times, 36 Sc (66)
Round 19) [9 sc, dec] rep 6 times (60) Round 20) [3 sc, dec] rep 12 times (48) Round 21) [6 sc, dec] rep 6 times (42) Round 22) [5 sc, dec] rep 6 times (36) Round 23) [1 sc, dec] rep 12 times (24) Round 24) [2 sc, dec] rep 6 times (18) Round 25) [1 sc, dec] rep 6 times (12) Round 26) dec 6 times (6)
Finish off. Stuff the head before closing. Shaping the head while stuffing is very important so that the head doesn’t become to spherical. Make sure to adequately stuff the snout to help it slightly project forward.

Body

Use Minty.
Chain 8. We are going to crochet around the chain.
Round 1) 6 sc, 3 sc in the next stitch, 6 sc, 3 sc in the next stitch (18)
Round 2) [2 sc, inc] repeat around (24) Round 3) [3 sc, inc] repeat around (30)
Round 4) [4 sc, inc] repeat around (36)

Round 5) [5 sc, inc] repeat around (42) Round 6) sc around (42)
Round 7) [6 sc, inc] rep 6 times (48) Round 8) sc around (48)
Round 9) [6 sc, dec] rep 6 times (42)
Round 10) sc around (42)
Round 11) sc around (42)
Round 12) [5 sc, dec] rep 6 times (36)
Round 13) sc around (36)
Round 14) sc around (36)
Round 15) sc around (36)
Round 16) [4 sc, dec] rep 6 times (30)
Round 17) SC around (30)
Round 18) SC around (30)
Round 19) sc around (30)
Finish with a slip stitch. Leave a long tail for sewing. Do not close. Stuff the body.

Ears

Use Minty.
Round 1)
6 sc in Magic Ring (6)
Round 2)
Round 3) Round 4)
[1 sc, inc] rep 3 times (9) [2 sc, inc] rep 3 times (12)
Round 5)
[3 sc, inc] rep 3 times (15) [4 sc, inc] rep 3 times (18)
Round 6)
[5 sc, inc] rep 3 times (21)
Finish off. Do not close. Stuff the ear.

Back Foot

Use Minty. Make two.
Round 1) 8 sc in Magic Ring (8) Round 2) inc around (16)
Round 3) sc around in Back Loops (16) Round 4) sc around (16)
*Now we are going to crochet in rows to increase the height of one side. Turn your work. Do not chain at the end of each row.
Row 5) 10 sc, turn
Row 6)9 sc, turn
Row 7)8 sc, turn
Row 8)7 sc, turn
Finish off. Stuff the foot.

Front Foot

Use Minty. Make two.
Round 1) 8 sc in Magic Ring (8) Round 2) inc around (16)
Round 3) sc around in Back Loops (16)
Round 4) sc around (16)
Round 5) sc around (16)
*Now we are going to crochet in rows to increase the height of one side. Turn your work. Do not chain at the end of each row.
Row 6)10 sc, turn
Row 7)9 sc, turn
Row 8)8 sc, turn
Row 9)7 sc, turn
Finish off. Stuff the foot.

Hip

Use Minty. Make two.
Round 1) 6 sc in magic ring (6) Round 2) Inc around (12)
Round 3) [1 sc, inc] rep 6 times (18) Round 4) [2 sc, inc] rep 6 times (24) Round 5) [3 sc, inc] rep 6 times (30) Round 6) Sc around (30)
Round 7) Dec 6 times, 18 sc (24) Round 8) Sc around (24)

Vines

Use Hunter Green. Make two. Round 1) 4 sc in magic ring (4) Round 2) [1 sc, inc] rep 2 times (6) Round 3) [2 sc, inc] rep 2 times (8) Round 4) [3 sc, inc] rep 2 times (10) Round 5) sc around (10)
Round 6) [3 sc, dec] rep 2 times (8) Round 7) [2 sc, dec] rep 2 times (6) -At this point stuff the end of the vine- Round 8) sc around (6)
Round 9) 4 sc, dec (5)
Round 10) sc around (5)
Round 11) -Round 28) sc around (5) Finish off. Do not close off.

Bulb

Use Spring Green.
Chain 30, then join the ends of the chain together with a slip stitch to make a ring. Now we will begin to crochet in the round along the ring.
Round 1) [4 sc, inc] rep 6 times (36) Round 2) [5 sc, inc] rep 6 times (42) Round 3) [6 sc, inc] rep 6 times (48) Round 4) [7 sc, inc] rep 6 times (54) Round 5) sc around (54) Round 6) sc around (54)
Round 7) [7 sc, dec] rep 6 times (48)

Round 8) sc around (48)
Round 9) [6 sc, dec] rep 6 times (42)
Round 10) sc around (42)
Round 11) [5 sc, dec] rep 6 times (36)
Round 12) [1 sc, dec] rep 12 times (24)
Round 13) [2 sc, dec] rep 6 times (18)
Round 14) sc around (18)
Round 15) [1 sc, dec] rep 6 times (12)
Round 16) sc around (12)
Round 17) dec 6 times (6)
Close off. Lightly stuff the bulb.

Body Spots

The body spots can either be felted on from
teal felt, or they can be crocheted. Here is the
pattern for the crocheted spots.
The spots are crocheted in ROWS. At the end
of each row, chain 1 before turning your
work.
The spots come in three sizes. They are all
made from the color Real Teal.
Small Spot
Chain 2
Row 1) 1 sc (1)
Row 2) inc (2)
Finish off. Leave a Long tail for sewing.

Medium Spot
Chain 2
Row 1)1 sc (1)
Row 2) inc (2)
Row 3) _ sc, inc (3)
Finish off. Leave a long tail for sewing.
Large Spot
Chain 2.
Row 1) 1 sc (1)
Row 2) inc (2)
Row 3) sc, inc (3)
Row 4) inc, sc, inc (5)
Finish off.

Pokeball

To make the Pokeball you will need Red,
Black, and White yarn.
Start with Red.
Round 1) 6 scin magic ring (6)
Round 2) inc around (12)
Round 3) [1 sc, inc] rep 6 times (18)
Round 4) [2 sc, inc] rep 6 times (24)
Round 5) sc around (24)
Round 6) sl st around (24)
color change to black
Round 7) sl st around in back Loops only
(24)
color change to white
Round 8) sl st around in back Loops only
(24)
Round 9) sc around in back Loops only (24)
Round 10) [2 sc, dec] rep 6 times (18)
Round 11) [1 sc, dec] rep 6 times (12)
Round 12) dec around (6)
Stuff the pokeball and then close off.
For the ball’s button, cut out a small circle of
black felt and a slightly smaller circle of
white felt. Glue or needle felt the circles onto
the front of the ball with the white circle on
top of the black.

Eyes

The eyes are made from red and white felt. Use your scissors to cut out the shapes seen in the
picture below. Trim them to fit the face.

Body Spots

can either be felted on from teal felt, or they can be crocheted and sewn on. Below
are some reference pictures of crocheted spots and spot placement on the body.

Toes
Cut out six tiny triangle shapes from the white felt.
Tip: Looking at reference photos of Bulbasaur can be very helpful to help determine the best size
and spot placement on the
nebody. Its also very helpful in getting the eye shapes to look correct.

Before we begin assembly we must give Bulbasaur’s bulb its ridges. To do this we are going to
use a long piece of yarn and weave it through the bulb to divide it into six sections. You will need
your yarn needle to do this.

1.Take a long piece of spring green yarn and weave it
through the side of the bulb from the bottom to the
top.
2.Pull the yarn tight, it will pull in the the side of the
bulb. Repeat five more times.
3.Top down view of what the bulb should Look Like
when finished.

ASSEMBLY

Use the provided pictures of the finished Bulbasaur as a visual aid to help guide you in the assembly
process. | recommend using pins to help plan where you want to sew parts to the body.

1.Sew the open end body to the bottom
of the head.